show bundle load-balancing
To display load balancing information, such as the ports, usage, weight, and distribution of traffic on individual
members of a link bundle interface, use the show bundle load-balancing command in EXEC mode.
show bundle load-balancing [Bundle-Ether |Bundle-POS bundle-id] [brief] [detail] [location]
Syntax Description
(Optional) Specifies the number of the Ethernet bundle whose information you
want to display. Range is 1 through 65535.
Bundle-Ether bundle-id
(Optional) Specifies the number of the POS bundle whose information you
want to display. Range is 1 through 65535.
Bundle-POS bundle-id
(Optional) Displays summary information for all nodes or for a specified
location.
brief
(Optional) Displays detailed information for all nodes or for a specified location.detail
(Optional) Specifies the location of the node.
For more information about the syntax for the router, use the question mark (?)
online help function.
location
Command Default
When the brief or detail keywords are used and no location is specified, information is displayed for all
nodes on the router.
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.9.0
The Bundle-POS keyword was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
readbundle
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
638
Link Bundling Commands on the Cisco ASR 9000 Series Router
show bundle load-balancing
To Next Page
Loading...
Need help?
General
