Cisco A9K-SIP-700 Command Reference Guide

ppp ms-chap hostname
To configure the hostname for MS-CHAP authentication on an interface, use the ppp ms-chap hostname
command in interface configuration mode. To remove the hostname, use the no form of this command.
ppp ms-chap hostname hostname
no ppp ms-chap hostname hostname
Syntax Description
Specifies the hostname for MS-CHAP authentication.
hostname
Command Default
No default behavior or values
Command Modes
Interface configuration
Command History
ModificationRelease
This command was introduced.Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationsTask ID
read, writeppp
read, writeaaa
Examples
The following example shows how to configure the hostname for MS-CHAP authentication on an interface:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# interface serial 0/1/0/1
RP/0/RSP0/CPU0:router(config-if)# ppp ms-chap hostname Host_1
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
738
PPP Commands onthe Cisco ASR 9000 Series Router
ppp ms-chap hostname

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English