show bundle brief
To display summary information about all configured bundles, use the show bundle brief command in EXEC
configuration mode.
show bundle brief
Syntax Description
This command has no keywords or arguments.
Command Default
Information for all configured bundles is displayed.
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readbundle
Examples
These examples shows the status of two bundles, BE16 and BE100, that are configured on the router. Both
are Ethernet bundles and only bundle 16 is Up:
RP/0/RSP0/CPU0:router# show bundle brief
Thu Mar 3 14:40:35.167 PST
Name | IG | State | LACP | BFD | Links | Local b/w, |
| | | | | act/stby/cfgd | kbps |
-------|----------|---------------|------|-----|---------------|------------|
BE16 - Up On Off 1 / 1 / 2 1000000
BE100 - Down Off Off 0 / 0 / 0 0
Table 41: show bundle brief Field Descriptions, on page 636 describes the fields shown in the display.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
635
Link Bundling Commands on the Cisco ASR 9000 Series Router
show bundle brief
To Next Page
Loading...
Need help?
General
