show ethernet cfm summary
To display summary information about CFM, use the show ethernet cfm summary command in the EXEC
mode.
show ethernet cfm summary locationnode-id
Syntax Description
(Optional) Specifies the location for which CFM summary is required. If the location
is not specified, an overall summary for all nodes is displayed, followed by information
for each node. If the location is specified, only information from that node is displayed.
location node-id
Command Default
An overall summary for all nodes is displayed.
Command Modes
EXEC (#)
Command History
ModificationRelease
This command was introduced.Release 4.3.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
OperationTask ID
readethernet-services
Examples
This example shows how to display ethernet CFM summary:
RP/0/RSP0/CPU0:router# show ethernet cfm summary
CFM System Summary
==================
Domains 4
Services 10000
Local MEPS 10000
Operational 9997
Down MEPs 9997
Up MEPs 0
Offloaded 200
3.3ms 100
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
346
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
show ethernet cfm summary
To Next Page
Loading...
Need help?
General
