max-header
To define the maximum size header that can be compressed, use the max-header command in IPHC profile
configuration mode. To return to the default maximum size, use the no form of this command.
max-header number-of-bytes
no max-header [ number-of-bytes ]
Syntax Description
Maximum size, in bytes, of a header that can be compressed.The range is
from 20 to 40. The default is 40.
number-of-bytes
Command Default
Number-of-bytes; 40.
Command Modes
IPHC profile configuration
Command History
ModificationRelease
This command was introduced.Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The maximum header size can be configured only within an IPHC profile.Note
Task ID
OperationsTask ID
read, writeip-services
Examples
The following example shows how to define the maximum size header that can be compressed.
RP/0/RSP0/CPU0:router(config)# config
RP/0/RSP0/CPU0:router(config)# iphc profile Profile_1 type iphc
RP/0/RSP0/CPU0:router(config-iphc-profile)# max-header 20
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
797
Serial Interface Commands on the Cisco ASR 9000 Series Router
max-header
To Next Page
Loading...
Need help?
General
