Examples
This example shows how to clear the alarms counters for a 10-Gigabit Ethernet WAN interface:
RP/0/RSP0/CPU0:router # clear counters wanphy 0/6/0/0 stats
Related Commands
DescriptionCommand
Displays alarms, registers, and module information for a
10-Gigabit Ethernet WAN PHY controller.
show controllers wanphy, on page 1105
Clears the alarms counters for a specific 10-Gigabit Ethernet
WAN PHY controller.
clear controller wanphy, on page 1096
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1099
10-Gigabit Ethernet WAN PHY Controller Commandson the Cisco ASR 9000 Series Router
clear counters wanphy
To Next Page
Loading...
Need help?
General
