Examples
The following example shows how to access the POS configuration submode from the POS configuration
mode:
RP/0/RSP0/CPU0:router(config)# interface POS 0/1/0/2
RP/0/RSP0/CPU0:router(config-if)# POS
RP/0/RSP0/CPU0:router(config-if-pos)#
Related Commands
DescriptionCommand
Sets the length of the CRC on a Packet-over-SONET/SDH (POS)
interface.
crc (POS), on page 694
Specifies a number of flag sequences to be inserted between the
packets.
transmit-delay, on page 707
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
703
Packet-over-SONET Interface Commands on the Cisco ASR 9000 Series Router
pos
To Next Page
Loading...
Need help?
General
