Examples
The following example shows how to enable non-TCP compression within an IP header compression (IPHC)
profile:
RP/0/RSP0/CPU0:router(config)# config
RP/0/RSP0/CPU0:router(config)# iphc profile Profile_1 type iphc
RP/0/RSP0/CPU0:router(config-iphc-profile)# non-tcp context absolute 255
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
800
Serial Interface Commands on the Cisco ASR 9000 Series Router
non-tcp context absolute
To Next Page
Loading...
Need help?
General
