Security Commands 1030
Example
The following example displays Denial of Service configuration information.
console#show dos-control
SIPDIP Mode...............................Disable
First Fragment Mode.......................Disable
Min TCP Hdr Size..........................20
TCP Fragment Mode........................ Disable
TCP Flag Mode.............................Disable
L4 Port Mode..............................Disable
ICMP Mode.................................Disable
Max ICMP Pkt Size.........................512
show system internal pktmgr
Use the show system internal pktmgr command to display the configured
CPU rate limit for unknown packets in packets per second.
Syntax
show system internal pktmgr internal control sw-rate-limit
Default Configuration
This command has no default configuration.
Command Modes
Privileged Exec mode
User Guidelines
See the rate-limit cpu command for further information on the output of this
command.
Example
console# show system internal pktmgr internal control sw-rate-limit
Inband pps global threshold 1024
To Next Page
Loading...
Need help?
General
