Switch Management Commands 2197
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command is only applicable to firmware upgradable interfaces. 1G
interfaces are never shown in the command output. Some 10G interfaces may
show as not firmware upgradable.
Example
console#show interfaces advanced firmware
Port Revision Part number
-------- ---------- -----------
Te1/0/1 0x411 BCM8727
Te1/0/2 0x411 BCM8727
Te1/0/3 0x411 BCM8727
Te1/0/4 0x411 BCM8727
Te1/0/5 0x411 BCM8727
show interfaces utilization
Use this command to display interface utilization.
Syntax
show interfaces utilization [interface-id]
• interface-id—A physical or port-channel interface identifier.
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
To Next Page
Loading...
Need help?
General
