Switch Management Commands 2031
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec
User Guidelines
Debug commands should be used with caution. Switch behavior may be
adversely affected by the additional processing load incurred by enabling
debug output.
Example
The following examples enables display of CFM events on the console.
console#debug cfm event
debug clear
Use the debug clear command to disable all debug traces.
Syntax
debug clear
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode.
User Guidelines
There are no user guidelines for this command.
Example
console#debug clear
To Next Page
Loading...
Need help?
General
