Switch Management Commands 2013
show rmon alarms
Use the show rmon alarms command in User Exec mode to display the
alarms summary table.
Syntax
show rmon alarms
Default Configuration
This command has no arguments or keywords.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the alarms summary table:
console> show rmon alarms
Index OID Owner
----- ---------------------- -------
1 1.3.6.1.2.1.2.2.1.10.1 CLI
2 1.3.6.1.2.1.2.2.1.10.1 Manager
3 1.3.6.1.2.1.2.2.1.10.9 CLI
The following table describes the significant fields shown in the display:
Field Description
Index An index that uniquely identifies the entry.
OID Monitored variable OID.
Owner The entity that configured this entry.
To Next Page
Loading...
Need help?
General
