Layer 2 Switching Commands 338
Commands in this Section
This section explains the following commands:
clear ip dhcp snooping binding
Use the clear ip dhcp snooping binding command to clear all DHCP
Snooping bindings on a specific interface or on all interfaces.
Syntax
clear ip dhcp snooping binding {* | interface interface-id}
•*—
Clear all DHCP Snooping entries.
• interface-id—
Clear all DHCP Snooping entries on the specified interface.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec
User Guidelines
There are no user guidelines for this command.
clear ip dhcp snooping binding ip dhcp snooping trust
clear ip dhcp snooping statistics ip dhcp snooping verify mac-address
ip dhcp snooping show ip dhcp snooping
ip dhcp snooping binding show ip dhcp snooping binding
ip dhcp snooping database show ip dhcp snooping database
ip dhcp snooping database write-delay show ip dhcp snooping interfaces
ip dhcp snooping limit show ip dhcp snooping statistics
ip dhcp snooping log-invalid
–
To Next Page
Loading...
Need help?
General
