Dell N1100-ON User Manual

Layer 2 Switching Commands 710
the same direction. Applying a policy globally applies the policy to all physical
interfaces. The policy appears in the running-config as part of the individual
interface configuration.
Example
The following example shows how to attach a service policy named “DELL” to
all interfaces for packets ingressing the switch.
console(config)#service-policy in DELL
show class-map
Use the show class-map command to display all configuration information for
the specified class.
NOTE: This command is not available on the N1500 Series switches.
Syntax
show class-map [classname]
• classname — Specifies the valid name of an existing DiffServ class.
(Range: 1–31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configuration information for the class
named “Dell”.
console#show class-map
Class L3

Dell N1100-ON Specifications

General

Brand	Dell
Model	N1100-ON
Category	Switch
Language	English