Switch Management Commands 2091
Syntax
show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP communications status.
Console # show snmp
Community-String Community-Access View name IP address
----------------------------------------------------
public read only user-view All
private read write Default 172.16.1.1
private su Default Super 172.17.1.1
Community-String Group nameIP address
-----------------------------------
publicuser-groupAll
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Target Address Type Community Version UDP Filter TO Retries
Port name Sec
-------------- ------ --------- ------- ---- ------ --- -----
192.122.173.42 Trap public 2 162 filt1 15 3
192.122.173.42 Inform public 2 162 filt2 15 3
Version 3 notifications
Target Address Type Username Security UDP Filter TO Retries
Level Port name Sec
-------------- ----- -------- -------- ---- ------ --- ------
To Next Page
Loading...
Need help?
General
