Layer 3 Routing Commands 1417
User Guidelines
This command has no user guidelines.
Example
The following example configures a metric of 5 for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip dvmrp metric 5
show ip dvmrp
Use the show ip dvmrp command to display the system-wide information for
DVMRP.
Syntax
show ip dvmrp
Default Configuration
This command has no default condition.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide information for DVMRP.
console(config)#show ip dvmrp
Admin Mode................................. Enabled
Version.................................... 3
Total Number of Routes..................... 0
Reachable Routes........................... 0
DVMRP INTERFACE STATUS
Interface Interface Mode Operational-Status
--------- -------------- ------------------
To Next Page
Loading...
Need help?
General
