Layer 2 Switching Commands 356
•
mac-address
—
A valid mac address in standard format.
•
vlan-id
—
A configured VLAN id. (Range 1-4093)
•
ip-address
—
A valid IPv6 address.
•
interface-id
—
A valid physical interface ID in short or long format.
• port-channel-number—A valid port channel identifier.
Default Configuration
By default, no static DHCP bindings are configured.
Command Modes
Global Configuration mode
User Guidelines
Static bindings do not age out of the DHCP binding database.
ipv6 dhcp snooping database
Use the ipv6 dhcp snooping database command to configure the persistent
location of the DHCP snooping database. This can be a local or remote file
on a TFTP server.
Syntax
ipv6 dhcp snooping database {local | tftp://hostIP/filename}
no ipv6 dhcp snooping database
Default Configuration
By default, the local database is used.
Command Modes
Global Configuration mode
To Next Page
Loading...
Need help?
General
