Switch Management Commands 1966
• ipv6-address—An IPv6 address (not a prefix).
Default Configuration
By default, no IPv6 gateway is configured.
Command Mode
Interface (out-of-band) Configuration mode
User Guidelines
This command is only valid for switches equipped with an out-of-band
interface.
show hosts
Use the show hosts command in User Exec mode to display the default
domain name, a list of name server hosts, and the static and cached list of
host names and addresses.
Syntax
shows hosts [hostname].
• hostname—(Range: 1–255 characters). The command allows spaces in the
host name when specified in double quotes. For example,
console(config)#show hosts “host name”
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
To Next Page
Loading...
Need help?
General
