Audio Visual Bridging Commands 1099
This example maps class B traffic onto user priority 3.
console(config)#msrp srclassqav class b pcp 3
console(config)#show msrp summary
MSRP Global Admin Mode......................... Enabled
MSRP Talker Pruning............................ Disabled
MSRP Maximum Fan-in Ports...................... 12
MSRP Boundary Propagation...................... Disabled
QAV class A priority........................... 4
QAV class A remap priority..................... 1
QAV class B priority........................... 3
QAV class B remap priority..................... 1
msrp talker-pruning
Use this command to enable source pruning. Use the no form of the
command to disable source pruning.
Syntax
msrp talker-pruning
no msrp talker-pruning
Default Configuration
By default, talkers are not pruned.
Command Mode
Global Configuration
User Guidelines
Source pruning allows service users (such as a bridge) that are sources of
frames destined for a number of groups, such as server stations or routers, to
avoid unnecessary flooding of traffic on their local LANs in circumstances
where there are no current group members in the network that wish to receive
such traffic.
Talker pruning can only be configured if MSRP is globally disabled.
To Next Page
Loading...
Need help?
General
