Security Commands 936
test 6.6.6.6 1812 No
switch-top#show aaa servers authentication name CoA-Server-1
RADIUS Server Name............................. CoA-Server-1
Current Server IP Address...................... 1.1.1.1
Number of Retransmits.......................... 3
Timeout Duration............................... 15
Deadtime....................................... 0
Port........................................... 3799
Source IP...................................... Default
RADIUS Accounting Mode......................... Disabled
Secret Configured.............................. Yes
Message Authenticator.......................... Enable
Number of CoA Requests Received...................... 203
Number of CoA ACK Responses Sent..................... 111
Number of CoA NAK Responses Sent...................... 37
Number of Coa Requests Ignored.........................55
Number of CoA Missing/Unsupported Attribute Requests...18
Number of CoA Session Context Not Found Requests.......5
Number of CoA Invalid Attribute Value Requests.........11
Number of Administratively Prohibited Requests.........3
show radius statistics
Use the show radius statistics command to show the statistics for an
authentication or accounting server.
Syntax
show radius statistics [accounting | authentication] [{ipaddress | hostname
| name servername}]
• accounting | authentication—The type of server (accounting or
authentication).
• ipaddress—The RADIUS server host IP address.
• hostname—Host name of the RADIUS server host. (Range: 1–158
characters). The command allows spaces in the host name when specified
in double quotes. For example, console(config)#snmp-server host “host
name”
• servername—The alias used to identify the server.
To Next Page
Loading...
Need help?
General
