Layer 3 Routing Commands 1762
Area Border Router Count....................... 1
AS Border Router Count......................... 0
Area LSA Count................................. 6
IPv6 Address...................................
FE80::202:BCFF:FE00:3146/1283FFE::2/64
OSPF Interface Events.......................... 53
Virtual Events................................. 13
Neighbor Events................................ 6
External LSA Count............................. 0
LSAs Received.................................. 660
Originate New LSAs............................. 853
Sent Packets................................... 1013
Received Packets............................... 893
Discards....................................... 48
Bad Version.................................... 0
Virtual Link Not Found......................... 9
Area Mismatch.................................. 39
Invalid Destination Address.................... 0
No Neighbor at Source Address.................. 0
Invalid OSPF Packet Type....................... 0
Packet Type Sent Received
-------------------- ---------- ----------
Hello 295 219
Database Description 10 14
LS Request 4 4
LS Update 521 398
LS Acknowledgment 209 282
show ipv6 ospf interface vlan
Use the show ipv6 ospf interface vlan command to display OSPFv3
configuration and status information for a specific VLAN.
Syntax
show ipv6 ospf interface vlan {vlan-id | brief}
• vlan-id — Valid VLAN ID. Range is 1-4093.
• brief — Displays a snapshot of configured interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
To Next Page
Loading...
Need help?
General
