Dell N1100-ON User Manual

Layer 2 Switching Commands 722
Queue ID Minimum Threshold Probability Scale ECN Enabled
-------- ----------------- ----------------- -------------
0 40/ 30/ 20 8/ 8/ 8 1/ 0/ 0
1 40/ 30/ 20 8/ 8/ 8 1/ 0/ 0
2 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
3 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
4 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
5 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
6 40/ 30/ 20 8/ 8/ 8 0/ 0/ 0
show policy-map
Use the show policy-map command to display all configuration information
for the specified policy.
NOTE: This command is not available on the N1500 Series switches.
Syntax
show policy-map [policyname]
• policyname — Specifies the name of a valid existing DiffServ policy.
(Range: 1-31)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the DiffServ information.
console#show policy-map
Policy Name Policy Type Class Members
----------- ----------- -------------
POLY1 xxx DellClass
DELL xxx DellClass

Dell N1100-ON Specifications

General

Brand	Dell
Model	N1100-ON
Category	Switch
Language	English