Dell N1100-ON User Manual

Switch Management Commands 1930
show ipv6 dhcp
Use the show ipv6 dhcp command to display the DHCPv6 server name and
status.
Syntax
show ipv6 dhcp
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
The DUID value of the server will only appear in the output when a DHCPv6
lease is active.
Example
The following example displays the DHCPv6 server name and status.
console#show ipv6 dhcp
DHCPv6 is disabled
Server DUID:
show ipv6 dhcp binding
Use the show ipv6 dhcp binding command to display the configured DHCP
pool.
Syntax
show ipv6 dhcp binding [ipv6-address]
• ipv6-address — Valid IPv6 address.
Default Configuration
This command has no default configuration.

Dell N1100-ON Specifications

General

Brand	Dell
Model	N1100-ON
Category	Switch
Language	English