Switch Management Commands 1847
Example
The following example displays the current SNTP configuration of the
device.
console#show sntp configuration
Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys: No trusted keys
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server Key Polling Priority Source Interface
-------------- ----------- ----------- ---------- ----------------
10.27.128.21 Disabled Enabled 1 Loopback 1
show sntp server
Use the show sntp server command to display the preconfigured SNTP
servers. The configured servers can be either IPv4 or IPv6 format.
Syntax
show sntp server
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Examples
console#show sntp server
Server Host Address: 2001::01
Server Type: IPv6
To Next Page
Loading...
Need help?
General
