Audio Visual Bridging Commands 1084
User Guidelines
MVRP is not compatible with GVRP. Do not enable GMRP/GVRP on MVRP
enabled switches.
The clear counters command also clears all MVRP statistics for all interfaces
in addition to clearing other counters.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example clears the MVRP counters on port channel 1
console#clear mmrp statistics po1
mvrp
This command enables MVRP on a specific interface. Use the no form of the
command to disable MVRP on an interface.
Syntax
mvrp
no mvrp
Default Configuration
By default, MVRP is disabled globally and on all interfaces.
Command Mode
Interface Configuration (physical and port channel) and Interface Range
(physical and port channel)
User Guidelines
MVRP is not compatible with GVRP/GMRP. Do not enable MVRP on
switches enabled for GVRP/GMRP.
MVRP operates in dynamic mode only. It both propagates VLAN
configuration and learns (and creates) VLANs learned from the link peer.
To Next Page
Loading...
Need help?
General
