Dell N1100-ON User Manual

Layer 2 Switching Commands 723
show policy-map interface
Use the show policy-map interface command to display policy-oriented
statistics information for the specified interface.
NOTE: This command is not available on the N1500 Series switches.
Syntax
show policy-map interface {interface-id} {in|out}
• interface-id—An Ethernet or port-channel identifier.
• in—Show inbound service policies. The offered value indicates the
number of packets received by the classifier.
• out—Show outbound service policies. The discarded value indicates the
number of packets discarded by the policy.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the statistics information for port te1/0/1.
console#show policy-map interface te1/0/1 in
Interface..................................... Te1/0/1
Operational Status............................ Down
Policy Name................................... DELL
Interface Summary:
Class Name.................................... Dell EMC Networking
In Offered Packets............................ 1003
In Discarded Packets.......................... 11

Dell N1100-ON Specifications

General

Brand	Dell
Model	N1100-ON
Category	Switch
Language	English