Dell N1100-ON User Manual

Layer 2 Switching Commands 408
--------- --------------- ------ ------- ---- ------ ----- - ---------------
Gi1/0/1 N/A Unknown Auto Down Off A 1
Gi1/0/2 N/A Unknown Auto Down Off T (11),1,3,5,7,9
15,19,25-4093
Gi1/0/3 N/A Unknown Auto Down Off A 1
Gi1/0/4 N/A Unknown Auto Down Off G (1),2,4,6,8,10
14,16,20,22,24
Gi1/0/5 N/A Unknown Auto Down Off A 1
Gi1/0/6 N/A Unknown Auto Down Off A 1
Gi1/0/7 N/A Unknown Auto Down Off A 1
Gi1/0/8 N/A Unknown Auto Down Off A 1
Gi1/0/9 N/A Unknown Auto Down Off A 1
Oob Type Link
State
--- ------------------------------ -----
oob Out-Of-Band Up
Port Description Link M VLAN
Channel State
------- ------------------------------ ------- - -------------------
Po1 Down H (4),5
show interfaces transceiver
Use the show interfaces transceiver command to display the optic static
parameters as well as the Dell EMC qualification.
Syntax
show interfaces transceiver [properties]
• properties—Displays the static parameters for the optics.
Default Configuration
This command has no default configuration.
Command Modes
User Exec, Privileged Exec modes.
User Guidelines
This command only supports the display of 10G and 40G transceivers.

Dell N1100-ON Specifications

General

Brand	Dell
Model	N1100-ON
Category	Switch
Language	English