Audio Visual Bridging Commands 1110
Default Configuration
This command has no defaults.
Command Mode
Privileged Exec.
User Guidelines
The clear counters command also clears all IEEE 802.1AS statistics for all
interfaces in addition to clearing other counters.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example clears the 802.1AS counters on port channel 1
console#clear dot1as statistics po1
dot1as (Global Configuration)
Use this command to globally enable IEEE 802.1AS. Use the no form of the
command to globally disable IEEE 802.1AS.
Syntax
dot1as
no dot1as
Default Configuration
By default, IEEE 802.1AS is disabled globally and on all interfaces.
Command Mode
Global Configuration
To Next Page
Loading...
Need help?
General
