Layer 3 Routing Commands 1432
•
interface-type interface-number
—Interface type of VLAN and a valid VLAN
ID
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the registered multicast groups for VLAN 3.
console#show ip igmp groups vlan 3 detail
REGISTERED MULTICAST GROUP DETAILS
Version1 Version2 Group
Multicast Last Up Expiry Host Host Compat
IP Address Reporter Time Time Timer Timer Mode
--------------- ------------ ---------- --------- ------- -------- -----
225.0.0.5 1.1.1.5 00:00:05 00:04:15 ------ 00:04:15 v2
show ip igmp interface
Use the show ip igmp interface command to display the IGMP information
for the specified interface.
Syntax
show ip igmp interface [stats][interface-type interface-number]
•
interface-type interface-number
—Interface type of VLAN and a valid
VLAN ID
• stats—Displays IGMP statistics for the specified VLAN.
Default Configuration
This command has no default configuration.
To Next Page
Loading...
Need help?
General
