Switch Management Commands 1977
history
Use the history command in Line Configuration mode to enable the
command history function. To disable the command history function, use the
no form of this command.
Syntax
history
no history
Default Configuration
The default value for this command is enabled.
Command Mode
Line Interface mode
User Guidelines
This command has no user guidelines.
Example
The following example disables the command history function for the current
terminal session.
console(config-line)# no history
history size
Use the history size command in Line Configuration mode to change the
command history buffer size for a particular line. To reset the command
history buffer size to the default setting, use the no form of this command.
Syntax
history size number-of-commands
no history size
• number-of-commands—Specifies the number of commands the system
may record in its command history buffer. (Range: 0-216)
To Next Page
Loading...
Need help?
General
