Layer 3 Routing Commands 1588
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast configuration settings such as
flags, timer settings, incoming and outgoing interfaces.
console#show ip mroute group 239.5.5.5 summary
console#show ip mroute group 239.5.5.5
show ip mroute source
Use the show ip mroute source command to display the multicast
configuration settings such as flags, timer settings, incoming and outgoing
interfaces, RPF neighboring routers, and expiration times of all the entries in
the multicast mroute table containing the sourceipaddr or sourceipaddr |
groupipaddr pair value(s).
Syntax
show ip mroute source sourceipaddr {summary}
• sourceipaddr — IP address of source.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
To Next Page
Loading...
Need help?
General
