Dell N1100-ON User Manual

Switch Management Commands 1881
Syntax
erase {filename | startup-config | backup | backup-config | application
filename}
• filename—The name of a file on the flash drive.
• startup-config—Erases the contents of the startup configuration file.
• backup—Erase the backup image.
• backup-config—Erases the backup configuration.
• application filename—Erases a Dell-supplied application.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
This command is not supported on USB drives.
filedescr
Use the filedescr command to add a description to a switch image. Use the
no version of this command to remove the description from the filename.
Syntax
filedescr {active | backup} description
no filedescr {active | backup}
• active | backup—Image file.
• description—Block of descriptive text. (Range: 0-128 characters)
Default Configuration
No description is attached to the active or backup image.
Use the show bootvar command to display the image description.

Dell N1100-ON Specifications

General

Brand	Dell
Model	N1100-ON
Category	Switch
Language	English