Switch Management Commands 1920
User Guidelines
This command has no user guidelines.
Example
console#show ip dhcp server statistics
show ip dhcp pool
Use the show ip dhcp pool command in User Exec or Privileged Exec mode
to display the configured DHCP pool or pools. If no pool name is specified,
information about all pools is displayed.
Syntax
show ip dhcp pool [all | poolname]
• poolname—Name of the pool. (Range: 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
show ip dhcp server statistics
Use the show ip dhcp server statistics command to display the DHCP server
binding and message counters.
Syntax
show ip dhcp server statistics
Default Configuration
This command has no default configuration.
To Next Page
Loading...
Need help?
General
