Layer 3 Routing Commands 1503
RIP............................................ 120
BGP External................................... 20
BGP Internal................................... 200
BGP Local...................................... 200
Configured Default Gateway..................... 253
DHCP Default Gateway........................... 254
show ip route summary
Use the show ip route summary command to display the routing table
summary, including best and non-best routes.
Syntax
show ip route summary [best]
•
best
—
Shows the number of best routes. To include the count of all routes, do
not use this optional parameter.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the IP route summary.
console#show ip route summary
Connected Routes............................... 4
Static Routes.................................. 0
Kernel Routes.................................. 0
Unnumbered Peer Routes......................... 0
RIP Routes..................................... 0
BGP Routes..................................... 0
External..................................... 0
Internal..................................... 0
Local........................................ 0
To Next Page
Loading...
Need help?
General
