Switch Management Commands 2284
Syntax
no crypto certificate { openflow | number }
• number— The number of the SSH certificate to remove(between 1 to
2).
• openflow—Remove the openflow certificate and associated
information.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The no crypto certificate openflow command erases the Certificate
Authority certificates used for validating the OpenFlow Controllers from the
switch. Issuing this command automatically disables and re-enables the
OpenFlow feature. New SSL certificates may be reloaded from the OpenFlow
Controller or may be manually loaded with the copy command.
Example
The following example removes the OpenFlow certificates from the switch
and resets the OpenFlow feature.
console(config)#no crypto certificate openflow
organization-unit
Use the organization-unit command in Crypto Certificate Generation or
Crypto Certificate Request mode to specify the organization unit.
Syntax
organization-unit organization-unit
• organization-unit — Specifies the organization-unit or department
name. (Range: 1–64 characters)
To Next Page
Loading...
Need help?
General
