Dell N1100-ON User Manual

Dell EMC Networking CLI 144
Captive Portal
show dot1x clients Displays detailed information about the users
who have successfully authenticated on the
system or on a specified port.
PE
show dot1x interface Shows the status of MAC Authentication
Bypass.
PE
show dot1x interface
statistics
Displays 802.1X statistics for the specified
interface.
PE
show dot1x users Displays active 802.1X authenticated users for
the switch.
PE
clear dot1x authentication–
history
Clears the authentication history table captured
during successful and unsuccessful
authentication.
PE
dot1x guest-vlan Sets the guest VLAN on a port. IC
dot1x unauth-vlan Specifies the unauthenticated VLAN on a port. IC
show dot1x advanced Displays 802.1X advanced features for the
switch or specified interface.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
authentication timeout Configures the authentication timeout. CP
captive-portal Enables the captive portal configuration mode. GC
enable Globally enables captive portal. CPI
http port Configures an additional HTTP port for captive
portal to monitor.
CP
https port Configures an additional HTTPS port for
captive portal to monitor.
CP
show captive-portal Displays the status of captive portal. PE
show captive-portal status Reports the status of all captive portal instances
in the system.
PE
Command Description Mode
a

Dell N1100-ON Specifications

General

Brand	Dell
Model	N1100-ON
Category	Switch
Language	English