Switch Management Commands 1919
show ip dhcp conflict
Use the show ip dhcp conflict command in User Exec mode to display
DHCP address conflicts for all relevant interfaces or a specified interface. If
an interface is specified, the optional statistics parameter is available to view
statistics for the specified interface.
Syntax
show ip dhcp conflict [address]
• address—A valid IPv4 address for which the conflict information is
desired.
Default Configuration
The command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
show ip dhcp global configuration
Use the show ip dhcp global configuration command to display the DHCP
global configuration.
Syntax
show ip dhcp server statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
To Next Page
Loading...
Need help?
General
