Layer 3 Routing Commands 1369
Command Mode
Privileged Exec mode
User Guidelines
The following information is displayed.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console#show ip bgp template
Template Name AF Configuration
------------- ---- -----------------------------
peer-grp1 timers 5 15
password rivendell
IPv4 advertisement-interval 15
peer-grp2 IPv4 prefix-list strider in
IPv4 maximum-prefix 100
IPv6 prefix-list gandolf in
IPv6 maximum-prefix 200
peer-grp3 IPv6 send-community
peer-grp4 update-source loopback 0
IPv4 next-hop-self
show ip bgp traffic
The show ip bgp traffic command list the routes that are allowed by the
specified community list.
Fields Description
Template Name The name of a BGP peer template.
AF The address family to which the configuration
command applies. This field is blank for session
parameters, which apply to all address families.
Configuration Configuration commands that are included in the
template.
To Next Page
Loading...
Need help?
General
