Switch Management Commands 1932
Examples
The following examples display DHCPv6 information for VLAN 11 when
configured in relay mode.
console> show ipv6 dhcp interface vlan 11
IPv6 Interface................................. vlan11
Mode........................................... Relay
Relay Address.................................. 2020:1::1
Relay Interface Number......................... Relay
Relay Remote ID................................
Option Flags...................................
console> show ipv6 dhcp interface vlan 11 statistics
DHCPv6 Interface vlan11 Statistics
------------------------------------
DHCPv6 Solicit Packets Received................ 0
DHCPv6 Request Packets Received................ 0
DHCPv6 Confirm Packets Received................ 0
DHCPv6 Renew Packets Received.................. 0
DHCPv6 Rebind Packets Received................. 0
DHCPv6 Release Packets Received................ 0
DHCPv6 Decline Packets Received................ 0
DHCPv6 Inform Packets Received................. 0
DHCPv6 Relay-forward Packets Received.......... 0
DHCPv6 Relay-reply Packets Received............ 0
DHCPv6 Malformed Packets Received.............. 0
Received DHCPv6 Packets Discarded.............. 0
Total DHCPv6 Packets Received.................. 0
DHCPv6 Advertisement Packets Transmitted....... 0
DHCPv6 Reply Packets Transmitted............... 0
DHCPv6 Reconfig Packets Transmitted............ 0
DHCPv6 Relay-reply Packets Transmitted......... 0
DHCPv6 Relay-forward Packets Transmitted....... 0
Total DHCPv6 Packets Transmitted............... 0
show ipv6 dhcp interface (Privileged Exec)
Use the show ipv6 dhcp interface command to display configuration and
status information about an IPv6 DHCP interface or all interfaces.
Syntax
show ipv6 dhcp interface [interface-id]{statistics}
• interface-id—Any valid IP interface. See Interface Naming Conventions
for interface representation.
To Next Page
Loading...
Need help?
General
