Audio Visual Bridging Commands 1085
Enabling MVRP on a port channel associated interface has no effect as long
as the interface is a member of the port channel.
MVRP is not compatible with private VLAN configured interfaces. Do not
enable GVRP on private VLAN enabled interfaces.
MVRP must also be enabled globally in order to become operational.
Command History
Introduced in version 6.2.0.1 firmware.
Example
This example enables MVRP on port channel 1
console(config)#interface po1
console(config-if-Po1)#mvrp
mvrp global
Use the mvrp global command to globally enable MVRP. Use the no form of
the command to globally disable MVRP.
Syntax
mvrp global
no mvrp global
Default Configuration
By default, MVRP is disabled globally and on all interfaces.
Command Mode
Global Configuration mode
User Guidelines
MVRP is not compatible with GVRP/GMRP. Do not enable MVRP on
switches enabled for GVRP/GMRP.
To Next Page
Loading...
Need help?
General
