Switch Management Commands 2287
User Guidelines
This command has no user guidelines.
Example
The following example displays the HTTP server configuration.
console#show ip http server status
HTTP server enabled. Port: 80
show ip http server secure status
Use the show ip http server secure status command to display the HTTP
secure server status information.
Syntax
show ip http server secure status
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays an HTTPS server configuration with DH Key
exchange enabled.
console#show ip http server secure status
HTTPS server enabled. Port: 443
DH Key exchange enabled.
Certificate 1 is active
Issued by: www.verisign.com
Valid from: 8/9/2003 to 8/9/2004
Subject: CN= router.gm.com, 0= General Motors, C= US
Finger print: DC789788 DC88A988 127897BC BB789788
To Next Page
Loading...
Need help?
General
