Switch Management Commands 2200
thresholds for buffering on the port are reached. A conscientious network
operator might want to examine why the devices attached to Gi1/0/5 and
Gi1/0/6 are sending so much traffic to Gi1/0/2 attached devices and either re-
distribute the devices, rate-limit traffic egressing the devices attached to
Gi1/0/5 and Gi1/0/6, or increase the number of links available for the device
attached to Gi1/0/2.
console#show interfaces utilization
Port Load Oper. Rx Tx Rx Tx Buffer Drop
Interval Speed Util Util PPS PPS Size Count
--------- -------- ------ ----- ----- ------- -------- -------- ---------
Gi1/0/1 300 10M 1 0 296 0 0 0
Gi1/0/2 300 1G 0 99 0 674500 938098 1102
Gi1/0/3 300 1G 0 15 0 112428 7 0
Gi1/0/4 300 0 0 0 0 1 0 0
Gi1/0/5 300 1G 37 0 249565 1 0 1
Gi1/0/6 300 1G 88 1 593560 3 0 0
Gi1/0/7 300 0 0 0 0 0 0 0
Gi1/0/8 300 0 0 0 0 1 0 0
show memory cpu
Use the show memory cpu command to check the total and available RAM
space on the switch.
Syntax
show memory cpu
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
No specific guidelines.
To Next Page
Loading...
Need help?
General
