Layer 2 Switching Commands 826
no vlan association subnet ip-address subnet-mask
• ip-address — Source IP address. (Range: Any valid IP address)
• subnet-mask — Subnet mask. (Range: Any valid subnet mask)
Default Configuration
No assigned ip-subnet.
Command Mode
VLAN Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example associates the 192.168.0.xxx IP address with VLAN ID
1.
console(config)# vlan 1
console(config-vlan-1)#vlan association subnet 192.168.0.0 255.255.255.0
vlan makestatic
This command changes a dynamically created VLAN (one that is created by
GVRP registration) to a static VLAN (one that is permanently configured and
defined). The ID is a valid VLAN identification number. VLAN range is 2-
4093.
Syntax
vlan makestatic vlan-id
• vlan-id — Valid VLAN ID. Range is 2–4093.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration Mode
To Next Page
Loading...
Need help?
General
