Layer 3 Routing Commands 1420
Example
The following example displays the next hop information on outgoing
interfaces for routing multicast datagrams.
console(config)#show ip dvmrp nexthop
Next Hop
Source IP Source Mask Interface Type
-------------- -------------- --------- ------
show ip dvmrp prune
Use the show ip dvmrp prune command to display the table that lists the
router’s upstream prune information.
Syntax
show ip dvmrp prune
Default Configuration
This command has no default condition.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the table that lists the router’s upstream
prune information.
console(config)#show ip dvmrp prune
Group IP Source IP Source Mask Expiry Time(secs)
-------------- -------------- -------------- ----------------
239.0.1.43 10.1.0.3 255.255.0.0 237
To Next Page
Loading...
Need help?
General
