Security Commands 951
Syntax
tacacs-server timeout [timeout]
no tacacs-server timeout
• timeout — The timeout value in seconds. (Range: 1–30)
Default Configuration
The default value is 5 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the timeout value as 30.
console(config)#tacacs-server timeout 30
timeout
Use the timeout command in TACACS Configuration mode to specify the
timeout value in seconds. If no timeout value is specified, the global value is
used.
Syntax
timeout [timeout]
• timeout — The timeout value in seconds. (Range: 1–30)
Default Configuration
If left unspecified, the timeout defaults to the global value.
Command Mode
TACACS Configuration mode
To Next Page
Loading...
Need help?
General
