Switch Management Commands 2001
Default Configuration
The default threshold is 90%.
Command Mode
Global Configuration.
User Guidelines
If no unit number is specified, all stack members are configured. The power
limit beyond which ports are disconnected has a configurable range as a
percentage of total available power for the individual unit. The maximum
power available is given in the table shown in the power inline management
command. The usage threshold check calculates the actual consumed power
and compares it against the (unit power maximum multiplied by the
threshold)/100. If unit power consumption exceeds the threshold, and the
power bank is active, ports are disconnected with an over-power condition.
The disconnection is priority based. When ports are disconnected due to
actual consumed power exceeding the threshold, a trap is generated.
Examples
console(config)# power inline usage-threshold 90
Command History
Syntax updated in 6.4 release.
clear power inline statistics
Use this command to clear the PoE statistics.
Syntax
clear power inline statistics [interface-id]
• interface-id—An Ethernet interface capable of supplying PoE power.
Default Configuration
This command has no default configuration.
To Next Page
Loading...
Need help?
General
