Dell N1100-ON User Manual

Layer 3 Routing Commands 1585
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide multicast information.
console#show ip multicast
Admin Mode........................... Enabled
Protocol State....................... Non-Operational
Table Max Size....................... 768
Protocol............................. PIMDM
Multicast forwarding cache entry count 0
show ip pim boundary
Use the show ip pim boundary command to display all the configured
administrative scoped multicast boundaries.
Syntax
show ip pim boundary {vlan vlan-id | all}
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.

Dell N1100-ON Specifications

General

Brand	Dell
Model	N1100-ON
Category	Switch
Language	English