Layer 3 Routing Commands 1501
Leaked Routes.................................. 0
RFC5549 Routes - IPv4 with IPv6 nexthop........ 0
Route Adds..................................... 1629
Route Modifies................................. 1144
Route Deletes.................................. 1305
Unresolved Route Adds.......................... 0
Invalid Route Adds............................. 0
Failed Route Adds.............................. 0
Failed Kernel Route Adds....................... 0
Hardware Failed Route Adds..................... 0
Reserved Locals................................ 0
Unique Next Hops (High)........................ 68 (132)
Next Hop Groups (High)......................... 299 (599)
ECMP Groups (High)............................. 290 (585)
ECMP Routes.................................... 256
Truncated ECMP Routes.......................... 34
ECMP Retries................................... 26400
Routes with 1 Next Hop......................... 34
Routes with 2 Next Hops........................ 285
Routes with 3 Next Hops........................ 5
show ip route static
Use the show ip route static command to display the statically configured
routes, whether they are reachable or not.
Syntax
show ip route static [name]
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
Use the optional name parameter to display the route name in addition to the
other information displayed
To Next Page
Loading...
Need help?
General
