Dell N1100-ON User Manual

Dell EMC Networking CLI 193
Routing Information Protocol
Command Description Mode
a
auto-summary Enables the RIP auto-summarization mode. RIP
default-information
originate (Router RIP
Configuration)
Controls the advertisement of default routes. RIP
default-metric Sets a default for the metric of distributed
routes.
RIP
distance rip Sets the route preference value of RIP in the
router.
RIP
distribute-list out Specifies the access list to filter routes received
from the source protocol.
RIP
enable Resets the default administrative mode of RIP
in the router (active).
RIP
hostroutesaccept Enables the RIP hostroutesaccept mode. RIP
ip rip Enables RIP on a router interface. IC
ip rip authentication Sets the RIP Version 2 Authentication Type and
Key for the specified interface.
IC
ip rip receive version Configures the interface to allow RIP control
packets of the specified version(s) to be
received.
IC
ip rip send version Configures the interface to allow RIP control
packets of the specified version to be sent.
IC
redistribute (RIP) Configures OSPF protocol to allow
redistribution of routes from the specified
source protocol/routers.
PIP
router rip Enters Router RIP mode. GC
show ip rip Displays information relevant to the RIP router. PE
show ip rip interface Displays information related to a particular RIP
interface.
PE
show ip rip interface brief Displays general information for each RIP
interface.
PE
split-horizon Sets the RIP split horizon mode. RIP

Dell N1100-ON Specifications

General

Brand	Dell
Model	N1100-ON
Category	Switch
Language	English