Switch Management Commands 2211
1 admin 10.130.128.17 00:00:05 00:00:10 Telnet
11 admin 10.27.192.56 00:00:27 00:00:28 HTTP
The following table describes the significant fields shown in the display.
show slot
Use the show slot command to display information about all the slots in the
system or detailed information for a specific slot.
Syntax
show slot [slot/port]
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Switch slots are populated with cards (see the
show supported cardtype
command below). However, not all slots are available to be externally
populated. Slots which may be populated in the field are marked as pluggable.
Field Description
Session ID The session identifier. Use with the disconnect
command.
User Name The login ID associated with the session.
Connection from The origin of the connection.
Idle Time The elapsed time since session activity was last
detected.
Session Time The elapsed time since the session was connected.
Session Type The type of connection (Serial, Telnet, SSH,
HTTP, HTTPS).
To Next Page
Loading...
Need help?
General
